Skip to main content
13 min read

Cyclone Pool Filter Cleaner: Do Spinning Cleaners Work?

The short answer

How the Cyclone spinning cartridge cleaner works, which Hayward, Pentair, Jandy and Intex cartridges fit it, how to use it, and who it pays off for.

In This Guide

Yes, spinning cleaners work for everything a hose can do. The Cyclone pool filter cleaner is a hose-powered stand that holds a cartridge on a bearing so it spins while you spray the pleats with a fan-tip wand, which makes a thorough rinse faster and lets you do it standing up. It pays off most for pool techs and owners of four-cartridge and eight-cartridge filters, and it cannot remove oils or calcium scale, which still need a soak. This site has not used the Cyclone, so everything below comes from the maker’s specs and instructions, its patent, cartridge spec sheets, and published owner reviews.

What Is the Cyclone Pool Filter Cleaner?

The Cyclone is a spinning cartridge filter cleaning system sold by Cyclone Filter Tools LLC. A support rod stands upright on legs, a retainer on a bearing plugs into the hole in the bottom of the cartridge, and water from your garden hose does the rest. There is no motor, battery, or power cord.

Jordan Thiessen invented it after 10 years of servicing pools, according to a profile on Skimmer’s blog, where his wife Maria Thiessen, who runs customer support, recalls five 3D printers running overnight during prototyping. The USPTO patent record for US 12,447,421 B2 lists Jordan and Jeff Thiessen of Murfreesboro, Tennessee as inventors, and its first claim describes the core of the cyclone pool filter cleaning system: a bottom filter retainer mounted on a roller bearing on a support rod, so the cartridge rotates freely around the rod.

Cyclone models and what each includes

Cyclone’s own store lists three kits:

  • Essential: the stand only, according to the maker’s store, so you connect your own wand or hose nozzle. Amazon listings bundle the Essential differently, so read the box contents.
  • Deluxe: the stand, a spray wand with a stainless fan tip and brass shut-off, retainers for 3, 4 and 6 inch openings, and a slim bag. The Cyclone Deluxe product page gives a collapsed size of 40 by 4 by 4 inches and a weight of 3 pounds.
  • Pro: a folding aluminum tripod that packs down to 30 by 6 by 6 inches, a 30 inch XL wand, the three retainers, and a bag with tool pockets.

During research the maker’s store listed these kits from $199.99 to $332.99, and an eBay listing for the original model ended at $243.79, so expect roughly $200 to $335 depending on the kit. The maker lists a 1-year warranty with free replacement parts for breakage in normal use. Its product page advertises a 90-day money-back guarantee, though one comparison badge on the same page says 30 days, so confirm the terms at checkout.

Not to be confused with the Darlly Cyclone

Search for a cyclone filter cleaner and you will also find the Darlly Cyclone, a UK product (SKU SC785). It is a handheld trigger sprayer with long brushes, water jets, and a chamber that mixes cleaning liquid into the spray, and it connects to a garden hose with a Hozelock fitting. It does not spin the cartridge at all. This page is about the stand.

How Does a Spinning Pool Filter Cleaner Work?

A spinning pool filter cleaner turns the cartridge with the same water you clean it with. The cartridge sits on a bearing, and when you aim a fan spray slightly to one side of center, part of the water’s force pushes the pleats sideways and rotates the whole element. Every pleat then passes through the spray in turn, so you never stop to set the hose down and turn the cartridge by hand.

Rotation, spray angle, and speed

Three variables control the result, and the maker’s instructions cover all of them:

  • Spray angle sets the speed. Cyclone says to aim “just off-center” so the filter spins slowly. Aim nearer the center and the spin slows down; aim further out and it speeds up.
  • The target is 1 to 2 rotations per second. At that rate, the maker says, water does not fling off the cartridge and you can stay dry.
  • Water pressure sets how fast it cleans, not whether it spins. Cyclone’s FAQ says even weak pressure will turn the filter, and that low pressure may add 30 to 60 seconds per filter.

Speed matters because the spray needs dwell time to push debris out of a fold. A cartridge spinning too fast gets only a glancing hit on each pass, and an older or unevenly loaded cartridge starts to wobble. Cyclone’s fix for wobble is to slow the spin by aiming closer to the center.

Which Cartridges Fit the Cyclone?

The Cyclone fits cartridges with a 3, 4 or 6 inch center opening. Cyclone says the 3 inch retainer suits standard four-cartridge “quad” filters and the 4 and 6 inch retainers suit single-element filters, and it names only two exceptions: the Pentair FullFlowXF 620 sq ft cartridge, which is too tall, and very large Sta-Rite System 3 cartridges. It does not publish a maximum cartridge length.

To check real cartridges against those retainers, the table below uses Pentair’s Pleatco replacement cartridge table, which lists the diameter, length, and top and bottom hole size of each element.

FilterPleatco cartridgeDiameter x lengthCenter holeCyclone retainer
Pentair Clean & Clear Plus 420 (4 cartridges)PCC1057 x 26 in3 in3 in
Pentair Clean & Clear Plus 520PCC1307 x 32 in3 in3 in
Hayward SwimClear C4030 (4 cartridges)PA1067 x 25 1/2 in3 in3 in
Hayward SwimClear C7030 (8 cartridges)PA897 x 19 1/8 in3 in3 in
Jandy CV340 and CL340PJAN857 1/8 x 26 15/16 in3 in3 in
Hayward Star-Clear Plus C1750PA1758 15/16 x 28 3/16 in4 in4 in
Jandy CS150PWWCT1508 15/16 x 23 1/4 in4 in4 in
Pentair Clean & Clear 150PAP15010 1/16 x 31 1/8 in6 in6 in
Intex Type A or CPC7-1204 1/4 x 8 1/8 in2 inNone listed
Intex Type HPIN2H3 1/2 x 3 15/16 in1 1/4 inNone listed

Two patterns stand out. Every multi-cartridge filter in the table uses a 7 inch element with a 3 inch hole, so one retainer covers Pentair, Hayward and Jandy quad filters alike. And the small Intex elements have holes well under the smallest retainer Cyclone lists, which puts Intex owners outside what the stand is built for. If your cartridge is not in the table, measure the hole in the end cap and the overall length, and ask the maker before ordering if the element is unusually tall.

Cartridge count matters as much as fit. Hayward’s SwimClear owner’s manual lists four CX880XRE elements for the C4030 and eight CX591XRE elements for the C7030, so cleaning day on a C7030 means eight cartridges through the stand.

How Do You Use a Spinning Filter Cleaner Correctly?

Set the stand on level ground, seat the cartridge on the matching retainer, and spray just off-center from the top down at 1 to 2 turns per second until the runoff runs clear. These details separate a clean cartridge from a merely wet one:

  1. Pick level ground. In reviews on the maker’s site, one buyer said the stand would not spin freely on a sloped lawn, and another said it was hard to get spinning on uneven ground. A patio slab or driveway beats grass.
  2. Choose the retainer that fills the hole. Use the 3, 4 or 6 inch retainer that matches the end cap so the cartridge sits centered on the bearing.
  3. Wet the whole cartridge first. Neoterics, which makes a different water-powered cleaner, warns in its Blaster 3000 instructions that a dry filter soaks up water on one side first and the unbalanced weight can stop it rotating. Rinse all the way around before you try to spin it.
  4. Rinse the core. Hayward’s SwimClear manual says to wash each element inside and outside with a garden hose. The stand works on the outside of the pleats, so give the center tube its own rinse.
  5. Aim just off-center and set the speed. Start the spray at the top, adjust the angle until the cartridge turns 1 to 2 times per second, and slow it down if it wobbles.
  6. Work from top to bottom. Lower the spray slowly so each band of pleats gets several full rotations before you move on. Dirty water runs downhill, so starting high avoids rinsing debris onto pleats you already cleaned.
  7. Stop when the runoff is clear. Neoterics uses the same test for its own machine: when no more debris shows in the runoff water, the filter is clean.

Owners on the maker’s review page mention a learning curve on the spray angle, and one noted that a heavy pollen load took longer than advertised. Expect both on your first few cartridges.

Check your hose flow before blaming the tool

Cyclone does not publish a minimum flow rate. Neoterics does for its Blaster 3000, and the test works for any hose tool: time how long your faucet takes to fill a 5 gallon bucket. Neoterics rates 1 minute (5 GPM) as minimal, 45 seconds (7 GPM) as moderate, and 30 seconds (10 GPM) as its maximum. If your faucet is slow, Neoterics suggests trying another spigot, since faucets near the front of the house or the main line typically flow better.

Do not swap in a pressure washer to make up for weak flow. Hayward’s SwimClear manual says plainly not to pressure wash the cartridge because it can damage the element, and a spinning stand does not change that. The full routine, including nozzle distance and angle for cleaning by hand, is in our guide on how to clean a cartridge pool filter.

Who Does a Spinning Filter Cleaner Pay Off For?

A spinning stand pays off when you clean a lot of cartridge area: pool service techs, and owners of filters with four or eight tall cartridges. For a homeowner with one small cartridge, a good hose nozzle does the same job for far less money.

Pool service techs

Skimmer’s profile of the Cyclone works through the labor math for a route with 160 filter cleanings a year. At 40 minutes per quad filter, cutting that time in half saves 3,200 minutes, about 53 labor hours a year, which Skimmer values at roughly $4,000 at $75 an hour. That example takes the maker’s “half the time” claim as given. But at Skimmer’s $75 rate, even a $335 Pro kit equals about 4.5 labor hours, so it only has to save a few minutes per filter on a route that size. Standing upright instead of crouching over a cartridge also counts for someone cleaning filters every week.

Owners of multi-cartridge filters

A Pentair Clean & Clear Plus 420 or a Hayward SwimClear C4030 holds four tall cartridges, and a C7030 holds eight. Buyers on the maker’s review page report results such as eight filters in 17 minutes instead of about 2 hours, and four filters in about an hour instead of half a day. Treat those as favorable customer reports rather than measurements, since they come from the seller’s own review page. Still, if your set takes an hour or more with a hose and your back complains, this is the group the stand was built for.

Cyclone suggests cleaning quad systems every 3 months. Hayward’s manual ties cleaning to the gauge instead: clean when pressure rises 7 to 10 psi above the clean starting pressure. Our guide on how often to clean a cartridge filter explains why the gauge is the better trigger.

A single cartridge or an above-ground pool

One single-element cartridge takes a few minutes with a hose and a fan nozzle, and an Intex A or C cartridge does not fit the stand at all. Cyclone’s own FAQ puts ordinary nozzles at $20 to $30, a small fraction of the kit price. A homeowner in this group is better served by a pleat comb or wand from our ranked pool filter cleaning tool reviews, or by a plain cradle from the pool filter cleaning stand rankings, which holds the cartridge off the ground without a spinning bearing.

How Does a Spinning Cleaner Compare With a Nozzle, Comb, Brush, or Soak?

A spinning cleaner is a faster, easier way to do a hose rinse, not a different kind of cleaning. It beats the other spray tools on speed and posture, and it ties with them on what it can remove. The table shows where each method fits.

MethodTurns the cartridge for youHow it reaches the pleatsRemoves oilsRemoves calcium scaleBest fit
Spinning stand (Cyclone)Yes, hose-poweredFan spray, every pleat passes the jetNoNoMany or tall cartridges, service routes
Hose with fan or jet nozzleNo, you turn it by handGood if you work each foldNoNoOne cartridge, occasional cleaning
Pleat comb wandNoComb teeth split the pleats apartNoNoPacked pleats on a single cartridge
Spin-brush wandNoWater-driven brush scrubs the surfaceNoNoAlgae film on the pleat surface
Degreaser soak, overnightNot neededChemical reaches all of the mediaYesNoPressure that stays high after rinsing
Acid soak, after degreasingNot neededChemical reaches all of the mediaNoYesChalky, gritty scale from hard water

Every spray method in the table stops at the same line: water moves dirt, but it does not dissolve anything. That is where the next section picks up.

What Can a Spinning Filter Cleaner Not Remove?

No spray tool removes oils, sunscreen, body fats, or calcium scale, because those coat the fibers instead of sitting loose between them. If the gauge does not drop back to its normal clean reading after a thorough spin rinse, the cartridge needs chemistry, not more water. Cyclone’s marketing says its system means no overnight soaking, and that holds for dirt and debris, not for oil and scale.

The order matters. Soak in a cartridge degreaser overnight first, rinse, and only then use a diluted acid soak if chalky scale remains, because acid cannot reach scale sealed under oil. Our muriatic acid cartridge cleaning guide covers the dilution, timing, and safety rules, and the ranked pool cartridge filter cleaner picks compare the degreasers. A pool cartridge filter cleaner on Amazon is the product to pair with a spinning stand, which still earns its place on soak day by speeding up the rinses before and after.

Some cartridges are past saving. Hayward’s SwimClear manual says that if the starting pressure after cleaning sits more than 6 psi above the starting pressure the filter had with new elements, the cartridges should be replaced the next time the gauge reaches the cleaning mark.

Are There Other Pool Filter Cleaning Machines?

Yes. The other established pool filter cleaning machine lays the cartridge on its side and spins it over fixed jets, and several Cyclone lookalikes now sell on Amazon.

Neoterics Blaster 3000

Neoterics sells the Blaster 3000 as an automatic pool filter cleaner. The cartridge rests on its flanges across two support rods, a row of PowerJet nozzles sprays the pleats from below, and with the water on, the rods turn the filter for you. Neoterics’ instructions say it takes cartridges up to 34 inches long, but the jets cover only half the unit length, so longer filters must be flipped partway through. A cleaning normally takes 3 to 8 minutes. The cartridge needs round flanges: Neoterics notes that end caps with handle tabs or other shapes will not rotate.

The difference from the Cyclone is control. The Blaster aims for itself, which frees your hands but fixes the spray angle and distance. The Cyclone keeps the wand in your hand, so you can slow down on a dirty band of pleats.

Cyclone lookalike stands

An Amazon search for a cyclone filter cleaner also returns other brands with near-identical vertical stands. Tredre’s listing, for example, says its stand fits 3, 4 and 6 inch openings but that the adapter for 4 and 6 inch use is sold separately, supports filters up to 40 inches long, and stands on a five-legged stainless steel base. MOOFI sells another rotating stand under the cyclone name. Before buying any of them, check which adapters come in the box and what cartridge length the listing supports. If you would rather build something, the stand rankings linked above include a PVC cradle you can make yourself, though a cradle holds the cartridge still instead of spinning it.

Is a Spinning Pool Filter Cleaner Worth It?

Buy one if you clean four or more tall cartridges at a time, run a service route, or find that bending over a cartridge is the worst part of the job. Skip it if you own one small cartridge or an Intex pump, where a nozzle or comb does the same work for a fraction of the price. Either way, keep a degreaser on the shelf: the spin rinse handles dirt, and the soak handles everything water cannot.

Shop the Cyclone filter cleaner on Amazon

Frequently Asked Questions

Does the Cyclone pool filter cleaner actually work?
For loose dirt and debris, yes. It does the job of a careful hose rinse, but the cartridge turns on a bearing so every pleat passes under the spray while you stand upright, and buyers on the maker's review page report finishing four-cartridge sets in a fraction of their old time. It does not dissolve oils or calcium scale, so a cartridge that stays at a high clean pressure still needs a chemical soak.
Will the Cyclone fit an Intex filter cartridge?
Not with the parts Cyclone sells. Its retainers are made for 3, 4 and 6 inch center openings, while Pentair's Pleatco table lists the Intex A or C cartridge with 2 inch openings and the Intex H with 1 1/4 inch openings. Those small paper elements are quick to rinse by hand anyway, so a spinning stand adds little for them.
Can you use a pressure washer on a spinning filter stand?
Hayward's SwimClear manual says not to pressure wash cartridge elements because it can damage them, and that applies no matter what holds the cartridge. If your hose will not turn the filter, aim the fan spray a little further off-center or move to a faucet with better flow instead.
Is the Darlly Cyclone the same product as the Cyclone Filter Cleaner?
No. The Darlly Cyclone (SKU SC785) is a UK handheld trigger cleaner with brushes and a chamber for cleaning liquid. The Cyclone Filter Cleaner is a spinning stand from Cyclone Filter Tools LLC that you use with a separate fan-tip wand. They share a name and nothing else.
Is the Cyclone filter cleaner sold on Amazon?
Yes. A CYCLONE FILTER CLEANER brand store on Amazon lists the Pro kit and an Essential Plus stand with three cores and a bag, and the Essential Plus listing names Cyclone Filter Tools LLC as the manufacturer. The same search also returns lookalike stands from other brands, so check the brand name and the included adapters before you order.
Pool Filter Guide Editorial Team logo
Pool Filter Guide Editorial Team Independent research site

Pool Filter Guide is an independent research site. Every guide is built from manufacturer owner's manuals, spec sheets, and published standards, and names its source in the text. We do not test products in-house, and no brand pays for placement or a better verdict.

Published: